spotlight

38 series


360
Start digging

Mixing of crop residues

Saving Money

Combining passes

SPADING IS MORE THAN JUST TURNING THE SOIL


More than 60 years of experience with spading machines is something Imants can look back on. From that experience we learned spading is more than just turning soil. Much more, in fact. Spading means mixing organic material with the living topsoil, incorporating crop residues and creating a seedbed, mixing green manure so it can be broken down into nutrients for the next crop. In short, both above the ground and in the soil you will achieve an even, homogeneous and well aerated soil after tillage with Imants spading machines. The true one pass tillage tool.

Read more about spading

THE DESIGN OF THE SX-SPADING MACHINE


The SX spading machines from Imants are rotary spading machines. They work the soil by means of spades which are attached to the spading shaft via a steel arm. On the 38 Series, 4 spade arms create a bank. The number of spades on the spade shaft varies according to the working width.


Depending on what you need on your farm Imants can recommend the right spading machine. There are spading machines that can work shallowly (12 cm (5”) deep) but as well as very deep (up to 135 cm (53”) is possible.

The SX-spadingblade


For use on all soil types except wet clay. The spading blades are easy to replace.

The spading machines are equipped with a cam clutch on the PTO shaft. This provides protection for the driveline.

Drive line of the 38 Series with driven power harrow.

SUBSOILING, YES OR NO?

SX SERIES


The SX-Series has a minimum working depth of 15 cm (6”), with a maximum of 35 cm (14”). The blades loosen the soil over the entire working width and mix manure, green manure or plant residues through the most biologically active part of the soil.

WX SERIES


The WX-Series is equipped with adjustable ripper legs between the banks, which can loosen the soil deeper than the spading depth. The WX-Series has fewer spading blades than the comparable SX-Series version, but the soil is still worked across the full working width. The ripper shanks loosen compacted layers of soil below the working depth of the spade shaft so that roots can also penetrate deeper into the soil resulting in a higher yield.

WHAT FINISH WOULD YOU LIKE TO HAVE?

Driven power harrow


The Imants 38 series spading machines can be equipped with a driven power harrow. This harrow breaks up the top layer and ensures a fine and even seedbed. It is the ideal roller for sandy and loamy soils. 

Ringroller


The ringroller with a diameter of 60 or 80 cm (24 or 31”) leaves a coarser seedbed and is suitable for all soil types.

Prismaroller


For heavier soil types the self-cleaning prismaroller is recommended. This roller consolidates and culti-packs the soil so that a even, flat and firm seed bed is left behind.   

OPTIONS FOR ALL SX/WX MODELS WITH POWER HARROW


To make the SX/WX-Series spading machines fit your needs, you can choose from a number of options. You can not only choose from a number of different finishing rollers, but also from different types of hitches for mounting seeders or planters or different types of towed implements (drawbar or K80 ball).


In order to prevent crop residues or green manure from dragging on the side plates, the SX/WX-Series spading machines can also be equipped with discs. These guide the organic material towards the spading shaft.


The image below shows the 48 series. Please contact us for options for the model of your choice.

SX/WX OPTIONS WITHOUT POWER HARROW


The SX/WX-Series spading machines without power harrow can be equipped with a clod grid device to further reduce and level the ground that has been spaded. In addition, you can also choose different types of ground driven rollers for these spading machines. In order to attach sowing or planting machines, the spaders can be fitted with a rear hitch.


The image below shows the 48 series. Please contact us for options for the model of your choice.

COMBINING PASSES


The SX/WX-Series spading machines can be used to prepare the soil for sowing or planting. But the spading machines can also be the heart of a combination allowing you to do all the soil prep and planting in one pass. A (Imants Culter) subsoiler loosens the soil before it is spaded and a seed drill or planter can be mounted or attached to ensure that all operations are done in one pass. Combining not only saves money and time but is also better for your soil. Here you can see some possible combinations.

MODELS OVERVIEW

Type

Working width Total width # spades Minimum power (hp) Maximum power (hp) Weight* harrow**

Shanks

38SX250H

250 cm / 98" 277 cm / 108" 24 95 160 1910 kg / 4211 lbs yes

no

38SX270H 270 cm / 105" 297 cm / 116" 24 95 160 1990 kg / 4387 lbs yes

no

38SX300H 300 cm / 117" 327 cm / 128" 28 95 160 2060 kg / 4542 lbs yes

no

38SX250 250 cm / 98" 277 cm / 108" 24 95 160 1600 kg / 3527 lbs no

no

38SX300 300 cm / 117" 327 cm / 128" 28 95 160 1790 kg* / 3946 lbs* no

no

38WX300H 300 cm / 117" 327 cm / 128" 20 110 190 2350 kg / 5181 lbs yes

5 pieces

38WX300

300 cm / 117"

327 cm / 128"

20

110

190

1975 kg* / 4354 lbs*

no

5 pieces

* Above weight is indicative without options and without roller (except the power harrow machines). 

** Machines without power harrow can optionally be equipped with various other rollers. 


ALL machines include: Walterscheid PTO shaft with Torque limiting clutch. Quick-change system for the spading blades (SX), LED lighting set and width warning signs. 

Ideal speed: 5 km/h , 3.1 m/h (1000 rpm). The actual driving speed may vary depending on the application or situation. 

Imants vorm

Want to know more?


Contact us. Call +31 (0)497 - 642 433 or mail to info@imants.nl.

Or fill in the contact form