27 series
Clean and fine seedbed
Mixing of crop residues
Improved rootability
No hard pan
Spading is more than just turning the soil
More than 60 years of experience with spading machines is something Imants can look back on. From that experience we learned spading is more than just turning soil. Much more, in fact. Spading means mixing organic material with the living topsoil, incorporating crop residues and creating a seedbed, mixing green manure so it can be broken down into nutrients for the next crop. In short, both above the ground and in the soil you will achieve an even, homogeneous and well aerated soil after tillage with Imants spading machines. The true one pass tillage tool.
THE DESIGN OF THE SX-SPADING MACHINE
Imants rotary spading machines work the soil by means of spades that are attached to the spade via a spade bracket. On the 27 series, 4 spade brackets form a wreath. The number of whorls on the spit varies according to the working width. The 27 series spading axle is without scrapers. Depending on what you need on your farm Imants can advise the right spading machine.
Did you know that Imants also manufactures spading machines that can work superficially (from 8 cm or 3 inch working depth) but also very deep (up to 135 cm or 53 inch working depth)?
The SX-spadingblade
For use on all soil types except wet clay.
The spade blades of the 27 series are easy to replace.
The 27 series spading machines are equipped with a cam clutch on the PTO shaft. This provides protection for the driveline.
Drive line of the 27 Series with driven power harrow.
SX SERIES
Depending on the model, the SX series has a minimum working depth of 15 cm (6”), with a maximum of approximately 45 cm (18”). In specific circumstances, working depths up to 55 cm (22”) are possible. Ask your Imants advisor for more information. The blades loosen the soil over the full working width and mix manure, green manure or plant residues through the most biologically active part of the soil.
WHAT FINISH WOULD YOU LIKE TO HAVE?
Driven power harrow
The Imants 27 series spading machines can be equipped with a driven power harrow. This roller levels, crumbles and works in crop residues. The result is an ideal seedbed. It is the ideal roller for sandy and loamy soils.
MODELS OVERVIEW
Type |
Working width |
Overall width |
# of blades |
Required power (hp) |
Max. power (hp) |
Weight (kg)* |
power harrow** |
tines |
27SX120R |
120 cm / 47 inch |
139 cm / 55 inch | 12 | 30 | 70 | 455 kg / 1001 lbs | no | no |
27SX150R |
150 cm / 60 inch |
169 cm / 67 inch | 16 | 35 | 70 | 520 kg / 1144 lbs | no | no |
27SX160R |
160 cm / 63 inch |
179 cm / 70 inch | 16 | 35 | 70 | 540 kg / 1188 lbs | no | no |
27SX180R |
180 cm / 71 inch |
199 cm / 78 inch | 16 | 45 | 70 | 570 kg / 1254 lbs | no | no |
27SX120RH |
120 cm / 47 inch |
139 cm / 55 inch | 12 | 30 | 70 | 615 kg / 1353 lbs | yes | no |
27SX150RH |
150 cm / 60 inch |
169 cm / 67 inch | 16 | 40 | 70 | 685 kg / 1507 lbs | yes | no |
27SX160RH |
160 cm / 63 inch |
179 cm / 70 inch | 16 | 40 | 70 | 700 kg / 1540 lbs | yes | no |
27SX160RH |
160 cm / 63 inch |
179 cm / 70 inch | 16 | 40 | 70 | 700 kg / 1540 lbs | yes | no |
* Above weight is indicative without options and without roller (except the power harrow machines).
** Machines without power harrow can optionally be equipped with various other rollers.
ALL machines include: Walterscheid PTO shaft with Torque limiting clutch. Quick-change system for the spading blades (SX), LED lighting set and width warning signs.
Ideal speed: 1-3.5 km/h, or 0.6 to 2.2 m/h (540rpm). The actual driving speed may vary depending on the application or situation.
Spading depth: 15-30 cm / 6-14 inch
Lifting cat. 1+2
Similar machines
Sectors
We know that our machines are sector-dependent. For example, a contracting company has very different needs than a horticultural company or a landscaper. So choose the sector that suits you best and find the most suitable machine for your needs.
Want to know more?
Contact us. Call +31 (0)497 - 642 433 or mail to info@imants.nl.