Discover the 48SX: spading, subsoiling, seedbed preparation, and even sowing are all possible in a single pass with this machine.
Time, fuel, and labor are scarcer than ever.
Subsoiling, spading, preparing seedbeds, and sowing in a single pass saves a lot of time and effort.
What are the benefits?
- Save up to 40% on fuel consumption per hectare
- Combine multiple work steps and save on spading
- With the special position of the spading blades, this machine can be used on sand and loam at a working speed of up to 5 km/h, depending on the conditions.
Advantages
- Suitable for sand and loam
- Available with integrated subsoiling legs, various spade blades, and various trailing rollers, as desired
- Robust design built by Imants with over 60 years of experience in spading machines
What do customers say about it?
One pass, high capacity: this is how Steenge Loonbedrijf spades with integrated subsoiling tines.
“The integrated subsoiler legs make it possible to spade and plant immediately afterwards in a single pass. This is particularly advantageous in dry springs: the potato planter can follow immediately, so that the work is completed in a single day. No extra passes, no unnecessary compaction.”
MODELS OVERVIEW
| Type | Working width (cm) |
Total width (cm) |
Number of spades |
Required power (hp) | Maximum power (hp) | Weight (kg)* | Power harrow** |
Subsoiling legs |
| 48SX300 | 300 | 339 | 36 | 140 | 250 | 2170 | no |
no |
48SX366 |
366 | 405 | 42 | 160 | 250 | 2360 | no |
no |
| 48SX300H | 300 | 339 | 36 | 140 | 250 | 2860 | yes |
no |
| 48SX366H | 366 | 405 | 42 | 160 | 250 | 3150 | yes |
no |
| 48WX300 | 300 | 339 | 30 | 150 | 300 | 2430 | no |
5 pieces |
| 48WX366 | 366 | 405 | 36 | 150 | 250 | 2580 | no |
6 pieces |
| 48WX300H | 300 | 339 | 30 | 150 | 300 | 3120 | yes |
5 pieces |
| 48WX366H | 366 | 405 | 36 | 170 | 300 | 3370 | yes |
6 pieces |
* The above weight is indicative without options and excluding roller (except for the power harrow machines).
** Machines without a power harrow can be optionally equipped with various other rollers.
ALL machines include: Walterscheid PTO shaft with cam clutch, quick-change system for spade blades (SX), LED lighting set, and width marking.
All models have an ideal driving speed of 7 km/h (1000 rpm). The actual driving speed may vary depending on the application.
Bereken jouw besparing met ImCal
Klik op de knop om samen jouw besparing te berekenen voor als je overstapt van jouw huidige werkmethode naar de werkmethode met een Imants 48SX Spitmachine.