60 series deepspading machines - Imants
spotlight

60 series


360
Start digging

Mixing of crop residues

Improved rootability

No hard pan

More than 60 years of experience with spading machines is something Imants can look back on. From that experience we learned that spading is more than just turning soil. Much more even. Spading means mixing organic material with the living topsoil, it means working crop residues under and creating a seedbed, it means mixing in green manure so that it can be broken down into nutrients for the next crop. 

From that experience we have learned that spading is more than just turning soil. A lot more even. Spading, that is organic material mixing with the living topsoil, it is working crop residues under and creating a seedbed, it is creating a seedbed, it is mixing in green manures so that they can be broken down into nutrients for the next crop, it is removing disturbing layers permanently and it is soil refinement. 

In short, both on the soil and in the soil preparation you can speak of a healthy soil after treatment with Imants machines.

Read more about spading

Imants spading machines  take care of your soil


Deep tillage is mainly used to remove soil compaction and disturbing layers. Through the rotating movement movement of the spading axle with spades, an optimal optimal mixing is achieved. The soil can also be enriched or if desired you can increase the size of the cultivation layer.

The end result? Disruptive layers are lifted, resulting in a better mixing of the nutrients through the soil and thus creating better rooting. This in turn leads in turn to better water permeability and more air in the soil. In other words, the (capillary) action of the soil is restored.


Intensive mixing or not?


Deep spading

The deep spitting machines have different working depths depending on the series. As a rule of thumb is that half of the maximum the minimum working depth.


Types of blades

To achieve the desired mixing result desired mixing results, we offer the choice of series we offer the choice of: 

  • narrow spade blades (breaking through with minimal mixing)
  • standard spade blades
  • standard spade blades in combination with mixing plates (intensive mixing)

The construction of the spading machine


The Imants deep spading machines are rotary spading machines. They work the ground by by means of a spade bracket that is attached to the spade. With the 60 series, 4 spade handles form a wreath (see image), The number of whorls on the axle varies according to the type and working width. 

The SX spading blade

suitable for all soil types except wet clay. Easy to replace.

The SM spading knife

suitable for all soil types and conditions.

All spading machines are equipped with a cam clutch on the PTO shaft. This provides protection for the driveline.

60DK SERIE

Driveline of the DKH-machine

60DR SERIE


A highly reliable power train makes for machine that does an excellent job with a relatively “small” tractor. In addition, depending on the type of soil, you can choose different types of trailing rollers such as cage roller (various diameters), tire packer etc.

Drive line DR machine

60DK series options


The 60SX150DKH with power harrow has been chosen as an image. Please contact us for options for the model of your choice.

60DR series options


The 60SX270DR has been chosen as an illustration. Please contact us for the options of the model of your choice

Models overview

Type Working width Overall width # spades Required power (hp) Maximum power (hp) Weight (kg/lbs)* Roller ** Subsoiling Working depth
60SX150DK 150 cm / 59 inch 175 cm / 69 inch 12 75 95 1100 / 2425 no no 45 - 60 cm / 18 - 24 inch
60SX150DK H 150 cm / 59 inch 191 cm / 75 inch 12 75 95 1425 / 3142 yes, power harrow no 45 - 60 cm / 18 - 24 inch
60SX180DK 180 cm / 71 inch 205 cm / 81 inch 16 75 95 1300 / 2866 no no 45 - 60 cm / 18 - 24 inch
60SX270DR 270 cm / 106 inch 308 cm / 121 inch 20 100 180 2300 / 5071 no no 45 - 65 / 18 - 26

* The above weight is indicative without options and without roller (except for the power harrow machines).
** Machines without driven roll can be fitted with various other rollers as an option
*** The actual driving speed will vary depending on the application.

ALL spading machines including: Walterscheid power take-off with cam clutch, Quick change system for the spading blades (SX), LED lighting kit and width markings.

Imants vorm

Want to know more?


Contact us. Call +31 (0)497 - 642 433 or mail to info@imants.nl.

Or fill in the contact form